From:
Scott
2005-01-16 12:11:44
|
I have a Marlin model 25 .22 with a manufacture date of 1982 what is it worth. Very few rounds have been run through it and there is very little wear on the wood. |
From:
Harry McLemore
2005-02-03 17:28:23
|
I have a .35 Cal Rem Marlin 336. Can the triger pull be lessen in pull-pressure? Seems to heavy now. |
From:
Bo Watkins
2005-02-24 12:38:32
|
I have a Marlin Model 50 Date between 1931 to 1935 22 LR.Looking for clips |
From:
M. Mont
2005-04-04 01:16:05
|
Where do I find the serial number on a Marlin 1893? |
From:
SIMPLEMAN
2005-04-09 02:43:25
|
HEY HARRRY, YOUR TRIGGER PULL CAN BE LESSENED, BUT IF DONE BY A PROFESSIONAL GUNSMITH, IT WILL PROBABLY COST YOU MORE THAN WHAT YOUR GUN IS WORTH. IF YOU CAN GET THE TRIGGER THROW ASSEMBLY OUT OF THE GUN, WHICH CAN BE DONE, BUT IS VERY AGGREVATING, IF YOU STUDY AND EXAMINE THE THROW MECHANISM, AND PAY CLOSE ATTENTION TO YOUR CONTACT POINTS, YOU CAN FILE DOWN THE PARTS YOUR SELF. YES IT CAN BE DONE BUT LET ME REMIND YOU TO FILE ONLY SMALL AMOUNTS OFF AT A TIME AND CHECK THE PRESSURE AS YOU GO UNTIL YOU GET IT TO ABOUT WHERE YOU WANT IT, ALSO ALLOW SOME TOLERANCE FOR SOME POLISHING AFTER YOU ARE DONE FILING,THE SMOOTHER YOU CAN GET THE TWO SURFACES, THE SMOOTHER AND CRISPER YOUR TRIGER PULL WILL BE WHEN YOU ARE FINESHED.REMEMBER TO OIL ALL YOUR CONTACT POINTS BEFORE REASSEMBLING THE GUN.JUST TAKE YOUR TIME AND PAY CLOSE ATTENTION TO WHAT YOU ARE DOING AND DONT CUT ANY CORNERS ON CHEAP , INEXPENSIVE MATERIALS OR TOOLS.YOU WILL BE FINE. GOOD LUCK. |
From:
GUN DUDE
2005-04-09 02:52:59
|
SCOTT, THAT GUN IS PROBABLY WORTH SOMEWHERE AROUND 75$ - 125$ IN MINT CONDITION. THEY ARE NOT VERY HIGHLY SOUGHT AFTER BECAUSE THEY ARE NOT VERY DEPENDABLE. USUALLY THE FIRING PIN OR THE EXTRACTORS GIVE UP FIRST. AFTER THEY USUALLY AINT WORTH FIXING, JUST GO TO WAL-MART AND BUY ANOTHER ONE FOR ABOUT 150$. BUT SERIOUSLY DUDE IF YOU CAN SELL IT FOR AROUND THAT PRICE, YOU BETTER GET RID OF IT, ESPECIALLY IF YOU PLAN ON DOING ANY AMOUNT OF PLINKING WITH IT, WHICH IS WHAT MOST EVERYBODY DOES WITH THEM, LATER DUDE. |
From:
2005-04-10 22:24:41
|
We would likw to find out how old a rifle is. It was given to my husband by his grandfather. How would we do this?
|
From:
shotgnn
2005-05-15 06:50:33
|
how much is a marlin model 29 .22cal pump rifle worth? you still have to cock the hammer to fire it ..thanks |
From:
2005-06-10 09:34:49
|
What is preban |
From:
2005-08-10 15:55:44
|
Preban isnt preban any longer. When you her the term "pre-ban" it refers to the Bill that then President William Jefferson Clinton signed Law stating that certain weopans were to be banned from importationa and a restriction was placed on the capacity of ammunition magazines. It also affected the production of a lot of good handguns and rifles in the US because of their capabilities. The law "sunset" in October of 2004 so therefore what was illegal according to that law before October 13, 2004 is legal now. It mainly affected the price of ammo magazines and assault rifles bringing their way out of control prices back down to earth. |
From:
john damron
2005-09-04 18:02:43
|
|
From:
john damron
2005-09-04 18:04:34
|
I own a used Taurus 44 Magnum revolver, in nickel finish. It has a 61/2" barrel with rubber grips. It is in excellent condition. Whats the $ value? |
From:
john worthington
2007-07-18 22:47:07
|
I need disassembly and/or assembly instructions for a Marlin 30-30 model 336 |
