From:
Paul N Murray
2005-03-10 14:41:10
|
2005 2cly 40hp keeps fouwling the top spark plug.The color of the plug doesn't change from what a new plug looks like when you get out of the box .takes about 2 tanks of gas.
thanks nmurray@goldmangreen.com |
From:
Mike
2005-04-16 18:55:25
|
I just bought a yamaha outboard model # C115TLRW. Can you tell me what year this is? The previous owener said it is a 1999.
Thanks.
mboudreaux14@cox.net |
From:
Rebekah
2005-05-16 11:06:07
|
Hi,
I live in the Amazon of Colombia and we mostly travel by boat. We have a 40 hp Yamaha and a 15 hp. There is much debris in the river and sometimes the driver hits submerged logs. The "tail" or lower unit of both motors have had teeth broken off and we are repairing them.
When we took the drive of the lower casing out, the position of the pin or shift plunger has made us question whether it had previously been put in backwards. One end has a rounded point and the other end is flat. Which end should go into the gear? The other end seems to rest against the housing, right?
The shift plunger to the 15 hp has a ridge on it that makes it seem that it should go in rounded end first into the gear. But the 40hp has it with the rounded end out. Does it make a difference in how well it works? The motor seems to work fine now but we don't want to wear the pin or the gears down before necessary.
Thanks for your help. |
From:
troy
2005-05-20 07:12:52
|
have a yamaha 50 made in 2000. put in a new impeller and checked thermastat but tell tale still weak and hot.please name some more areas to check. thanks |
From:
robert aulgur
2005-05-21 09:01:49
|
how to connect the battery |
From:
Bob
2005-06-01 21:15:37
|
WHAT IS THE EXACT HORSEPOWER OF A 2002 90HP YAMAHA |
From:
JImmmy D
2005-06-04 19:39:03
|
How can tell if my new 90HP yamaha outboard is a 2005 or a leftover 2004? the ID is 6H1L-1018472 |
From:
Rich C
2005-06-07 15:39:29
|
I have a yamaha 20AE outboard year unknown,what petrol should I run it on and does it need 2 stroke oil mix?. |
From:
2005-06-07 15:41:05
|
|
From:
Tom Riley
2005-06-11 15:54:15
|
I just bought and rigged a yamaha f50 and it was running fine. I then wired in a bow light and now the starter won't engage. The tach comes on. I have checked the fuses and they look fine. The battery is fine as well. Any suggestions? |
From:
dick
2005-06-12 21:17:11
|
i have 2003 C90hp. can i use splitfire sparkplugs? |
From:
albert
2005-06-21 23:08:35
|
My Yamaha motor SN is 6J9L307142 2, what year is it? |
From:
wtbtlc
2005-06-29 16:58:30
|
considering purchase of 300 HPDI. comments as to fuel econ., noise level, reliability |
From:
Tim Hefferan
2005-07-12 22:06:09
|
I have a 1990 Yamaha 4hp. I haven't used it in a while... I believe the mixture ratio was 25 to 1. What exactly does that come out to. I was thinking approx. 3oz. of oil to 2 gals of gas? help ! |
From:
harold joseph
2005-08-01 22:27:37
|
looking for wholesale supplier of used yamaha outboard motors 75hp-300hp at reasonable prices for reselling. contact me > haroldjoe@myself.com. |
From:
Tel Strickett
2005-08-26 02:27:27
|
I have a 1990 yamaha 40hp electric start 2 stroke outboard. What is the correct fuel/oil ratio to be using on this engine? |
From:
Mark Wydell
2005-08-30 21:19:21
|
I have a 2001 250hp saltwater series EFI.I found my engine down this morning and could not raise it with my trim button. I can hear the relay click. Any ideas? Thanks |
From:
Roggie
2005-09-15 16:28:55
|
Hello,
I am tring to fix the clog on my Yamaha because it is not allowing me to read the speed. How do you unclog it? |
From:
Matt
2008-05-25 06:47:57
|
What is the correct oil to gas ratio for a 2003 yamaha 40 hp 2 stroke outboard |
From:
jim
2008-04-20 15:37:16
|
ive got a 15 yamaha... was going to change the impeller when i disconnected the lower unit.. problem is i think i accidently turned the shift rod and now it becames loose... it just goes up and down... any help would be greatly appreciated because im stranded now on this sailboat. |
From:
griff12
2007-09-03 10:32:16
|
need to know the spark plug gap for a 2002 Yamaha 8 ph outboard motor? |
From:
steve
2008-07-15 20:11:26
|
what is compression on a 2001 250 hp yamaha |
From:
Terry
2008-07-22 13:37:42
|
Just bought a 40HP 2000 Yammy 3 cylinder that's been sitting for 2 years. No manual or advice available (owner deceased). It's been winterized. I've replaced the plugs. Fuel tanks empty. Starter with remote works fine. Haven't fired it up yet, its in very good condition (to look at). What precautions should I take when firing it up? How long run in neutral with ear muffs? Stay with 50:1 or go up to 100:1 after a good run? |
From:
Rod
2008-07-28 07:11:17
|
How can I identify the model year on a 15hp yamaha outboard motor? |
From:
bill
2009-08-13 16:08:10
|
I have a 2003 yamaha 4 stroke outboard motor. the red light is coming on. the motor runs fine until the light comes on. what could be the problem? |
From:
Jose Garcia
2009-11-05 19:56:34
|
Hi, looking to buy a boat with a Yamaha 2006 300 HDPI engine with 343 hrs. What should be the compression reading? How many hours are left on this engine?
Thanks for your input. |
