|
Angela Berkley,
High School Student
|
Carlings were replaced and tie-rods checked, old screw holes were plugged and the inner edge of the covering boards was routered.
Tie or tape brooms, mop handles and curtain rods in bundles.
|
|
Brian Mengel,
Civil Servant
|
Fixed-length tie rods provide straight tracking and eliminate periodic adjustments.
|
|
Luigi Pascioni,
Auto Mechanic
|
Suspension tie rods sometimes need new rubber bushes to reduce fore and aft movement for improved tyre wear and driveability.
|
|
Sarah Kennedy,
Fashion Model
|
Brackets, tie rods, bolts, turnbuckles and Ardox nails are hot dipped galvanized.
The tie rods fit through integral splines in the top and bottom rails, effectively making the tie rod a part of the rail.
Tie Rods: Look for cracked boots and bent rods.
|
|
Rob Verdann,
Afterdark Removalist
|
Tie rods or angles to support bottom purlin flanges against compression buckling due to special wind force.
|
|
Billie Kirgan,
Machinist
|
Tie-rods attach the process fluid cylinders to the hydraulic cylinder.
|
|
Jake Farley,
Truck Driver
|
Two tie rods attach the pedal levers at the vertical connecting point to a pair of opposed crank-arms attached to the extended axle of the rear wheel.
Steering Tie Rods: Adjustable, toe-in is adjustable on front and rear wheels.
Tie rods inside the approach slab directly connected the drilled shafts to the bridge’s steel girders.
|
|
|
